Difference between revisions of "Dxl monitor"
From Pengatom Robotics Wiki
(Created page with "The dxl_monitor program is a utility for managing your Dynamixel sensors and CM-730/Arbotix subcontroller register values. This program can be used to assign network IDs, chan...") |
(No difference)
|
Latest revision as of 09:04, 16 March 2017
The dxl_monitor program is a utility for managing your Dynamixel sensors and CM-730/Arbotix subcontroller register values. This program can be used to assign network IDs, change limits, monitor heat and load, as well modify register table values on the subcontroller.