Difference between revisions of "Dxl monitor"

From Pengatom Robotics Wiki
Jump to: navigation, search
(Created page with "The dxl_monitor program is a utility for managing your Dynamixel sensors and CM-730/Arbotix subcontroller register values. This program can be used to assign network IDs, chan...")
 
(No difference)

Latest revision as of 08:04, 16 March 2017

The dxl_monitor program is a utility for managing your Dynamixel sensors and CM-730/Arbotix subcontroller register values. This program can be used to assign network IDs, change limits, monitor heat and load, as well modify register table values on the subcontroller.

Robotis Darwin-OP Documentation on dxl_monitor